Yeah, I thought the speed increase was the reason for wanting dvipng. Can you elaborate on why it was necessary to install texlive into a domain directory rather than the user's root?

That's a good article you've written. Have you considered offering an option for per-month charges as well? I think the going rate on VPS is around $10 per 100MB, in which case a couple of monthly subscribers could see your service on a self-funding VPS in quick order.



Maximum Cash Discount on any plan with MAXCASH

How To Install PHP.INI / ionCube on DreamHost ]]> Post Reply?

Yeah, I thought the speed increase was the reason for wanting dvipng. Can you elaborate on why it was necessary to install texlive into a domain directory rather than the user's root?

That's a good article you've written. Have you considered offering an option for per-month charges as well? I think the going rate on VPS is around $10 per 100MB, in which case a couple of monthly subscribers could see your service on a self-funding VPS in quick order.



Maximum Cash Discount on any plan with MAXCASH

How To Install PHP.INI / ionCube on DreamHost ]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123771&page=0&view=collapsed&sb=5&o=14&vc=1#Post123771 Thu, 05 Nov 2009 22:44:13 -0800 spradlig 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123771&page=0&view=collapsed&sb=5&o=14&vc=1#Post123771 Post Reply?

Hey thanks for the quick response.

My site has a lot of latex calls so when John Forkosh stated that dvipng was easily twice as fast I really wanted to get that working.

Ultimately I found a way to get texlive installed under my domain. texlive includes both latex and dvipng. So once I got texlive installed it was really easy to get MathTex working.

The texlive instructions suggested certain directories be used for the installation. I could never get the installation to work under the directories that the texlive instructions suggested. Ultimately I did get texlive installed under my domain easily with their instructions.

I wrote up the instructions and put them on HubPages here:
http://hubpages.com/hub/Installing-MathTex-on-DreamHost

]]> Post Reply?

Hey thanks for the quick response.

My site has a lot of latex calls so when John Forkosh stated that dvipng was easily twice as fast I really wanted to get that working.

Ultimately I found a way to get texlive installed under my domain. texlive includes both latex and dvipng. So once I got texlive installed it was really easy to get MathTex working.

The texlive instructions suggested certain directories be used for the installation. I could never get the installation to work under the directories that the texlive instructions suggested. Ultimately I did get texlive installed under my domain easily with their instructions.

I wrote up the instructions and put them on HubPages here:
http://hubpages.com/hub/Installing-MathTex-on-DreamHost

]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123737&page=0&view=collapsed&sb=5&o=14&vc=1#Post123737 Thu, 05 Nov 2009 06:52:59 -0800 sXi 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123737&page=0&view=collapsed&sb=5&o=14&vc=1#Post123737 Post Reply?

Easy way out

mathTeX:

cc mathtex.c \ 
–DLATEX=\"$(which latex)\" \ 
–DDVIPS=\"$(which dvips)\" \ 
–DCONVERT=\"$(which convert)\" \ 
–o mathtex.cgi

Maximum Cash Discount on any plan with MAXCASH

How To Install PHP.INI / ionCube on DreamHost ]]> Post Reply?

Easy way out

mathTeX:

cc mathtex.c \ 
–DLATEX=\"$(which latex)\" \ 
–DDVIPS=\"$(which dvips)\" \ 
–DCONVERT=\"$(which convert)\" \ 
–o mathtex.cgi

Maximum Cash Discount on any plan with MAXCASH

How To Install PHP.INI / ionCube on DreamHost ]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123728&page=0&view=collapsed&sb=5&o=14&vc=1#Post123728 Thu, 05 Nov 2009 00:24:44 -0800 ichsie 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123728&page=0&view=collapsed&sb=5&o=14&vc=1#Post123728 Post Reply?

This may help you to manually make thumbs of your images: http://www.kavoir.com/2009/01/php-resize-image-and-store-to-file.html

DreamHost Promotion Codes
Make a Website ]]> Post Reply?

This may help you to manually make thumbs of your images: http://www.kavoir.com/2009/01/php-resize-image-and-store-to-file.html

DreamHost Promotion Codes
Make a Website ]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123718&page=0&view=collapsed&sb=5&o=14&vc=1#Post123718 Wed, 04 Nov 2009 23:57:37 -0800 sXi 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123718&page=0&view=collapsed&sb=5&o=14&vc=1#Post123718 Post Reply?

I've seen a theme that has that exact functionality built right in!

Can't recall it's name but I bet someone here will know where to get it.



Maximum Cash Discount on any plan with MAXCASH

How To Install PHP.INI / ionCube on DreamHost ]]> Post Reply?

I've seen a theme that has that exact functionality built right in!

Can't recall it's name but I bet someone here will know where to get it.



Maximum Cash Discount on any plan with MAXCASH

How To Install PHP.INI / ionCube on DreamHost ]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123704&page=0&view=collapsed&sb=5&o=14&vc=1#Post123704 Wed, 04 Nov 2009 19:37:51 -0800 stanwelks 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123704&page=0&view=collapsed&sb=5&o=14&vc=1#Post123704 Post Reply?

I want to post a graphic that will randomly rotate and when clicked, will link to a page with more info.

1.) Can someone please recommend widget or plugin that does this?

2.) Is there a widget or plugin that will also do this with videos?

Thanks!!!!!!

]]> Post Reply?

I want to post a graphic that will randomly rotate and when clicked, will link to a page with more info.

1.) Can someone please recommend widget or plugin that does this?

2.) Is there a widget or plugin that will also do this with videos?

Thanks!!!!!!

]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123697&page=0&view=collapsed&sb=5&o=14&vc=1#Post123697 Wed, 04 Nov 2009 18:39:14 -0800 jkofoed 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123697&page=0&view=collapsed&sb=5&o=14&vc=1#Post123697 Post Reply?

Well, I'm just using a different script, but would like to be able to use phpThumb for the caching features. If anyone knows why it doesn't seem to work, please reply and let me know.

TIA

Jason

]]> Post Reply?

Well, I'm just using a different script, but would like to be able to use phpThumb for the caching features. If anyone knows why it doesn't seem to work, please reply and let me know.

TIA

Jason

]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123681&page=0&view=collapsed&sb=5&o=14&vc=1#Post123681 Wed, 04 Nov 2009 09:42:43 -0800 mikecron 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123681&page=0&view=collapsed&sb=5&o=14&vc=1#Post123681 Post Reply?

Hi all,

I'm starting to work with Joomla and have followed some steps to mask the installation directory that I put Joomla in. I installed Joomla to my domain.com/j/ directory, and have set up my .htaccess file to make it appear as though all pages are coming right from the root: domain.com/

Internet Explorer seems to be the exception, however. All other browsers have no problem accessing the site (Firefox, Chrome, Safari, Opera, etc.) but IE returns a DNS error and says it can't connect to the domain.

Here's the content of my .htaccess file:

#These first two lines might already be in the file - no need to repeat
Options +FollowSymlinks
RewriteEngine on

# remove "www" (this may be optional)
#RewriteCond %{HTTP_HOST} ^www\.roninstudio\.net$ [NC]
#RewriteRule ^(.*)$ http://roninstudio.net/$1 [R=301]

# Redirect to the Joomla root folder
RewriteCond %{HTTP_HOST} ^(www\.)?roninstudio\.net$ [NC]
RewriteRule ^(index\.html)?$ http://www.roninstudio.net/j/ [R=301]

# Only apply to URLs on this domain
RewriteCond %{HTTP_HOST} ^(www\.)?roninstudio\.net$

# Only apply to URLs that aren't already under folder
RewriteCond %{REQUEST_URI} !^/j/

# Don't apply to URLs that go to existing files or folders
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d

# Rewrite all those to insert /j
RewriteRule ^(.*)$ /j/$1 [L]


Does anything here jump out at anyone as to why this might be the case? I cobbled these rules together based on various postings from the net -- my understanding on this topic is rudimentary, so I'm hoping someone else has a better grasp on this.

]]> Post Reply?

Hi all,

I'm starting to work with Joomla and have followed some steps to mask the installation directory that I put Joomla in. I installed Joomla to my domain.com/j/ directory, and have set up my .htaccess file to make it appear as though all pages are coming right from the root: domain.com/

Internet Explorer seems to be the exception, however. All other browsers have no problem accessing the site (Firefox, Chrome, Safari, Opera, etc.) but IE returns a DNS error and says it can't connect to the domain.

Here's the content of my .htaccess file:

#These first two lines might already be in the file - no need to repeat
Options +FollowSymlinks
RewriteEngine on

# remove "www" (this may be optional)
#RewriteCond %{HTTP_HOST} ^www\.roninstudio\.net$ [NC]
#RewriteRule ^(.*)$ http://roninstudio.net/$1 [R=301]

# Redirect to the Joomla root folder
RewriteCond %{HTTP_HOST} ^(www\.)?roninstudio\.net$ [NC]
RewriteRule ^(index\.html)?$ http://www.roninstudio.net/j/ [R=301]

# Only apply to URLs on this domain
RewriteCond %{HTTP_HOST} ^(www\.)?roninstudio\.net$

# Only apply to URLs that aren't already under folder
RewriteCond %{REQUEST_URI} !^/j/

# Don't apply to URLs that go to existing files or folders
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d

# Rewrite all those to insert /j
RewriteRule ^(.*)$ /j/$1 [L]


Does anything here jump out at anyone as to why this might be the case? I cobbled these rules together based on various postings from the net -- my understanding on this topic is rudimentary, so I'm hoping someone else has a better grasp on this.

]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123678&page=0&view=collapsed&sb=5&o=14&vc=1#Post123678 Wed, 04 Nov 2009 08:38:54 -0800 spradlig 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123678&page=0&view=collapsed&sb=5&o=14&vc=1#Post123678 Post Reply?

The MathTex instructions are here:
http://www.forkosh.com/mathtex.html

In those instructions they point me to this dvipng:
http://savannah.nongnu.org/projects/dvipng/

This does not appear to be a sourceforge version. I had not thought about attempting to find another version since this is the one MathTex sends me to. (And Forkosh is on DreamHost so I figure he's providing links to packages that worked in his account.)

Having looked up SourceForge's version it looks like the person updating SourveForge is also in charge of the site I pointed you to above. However, the latest version I saw on their site was 1.9 while SourceForge has a 1.12 version.

I will be trying to install this new version this afternoon but, being new to this, I'm always eager to hear recommendations.

Thanks




]]> Post Reply?

The MathTex instructions are here:
http://www.forkosh.com/mathtex.html

In those instructions they point me to this dvipng:
http://savannah.nongnu.org/projects/dvipng/

This does not appear to be a sourceforge version. I had not thought about attempting to find another version since this is the one MathTex sends me to. (And Forkosh is on DreamHost so I figure he's providing links to packages that worked in his account.)

Having looked up SourceForge's version it looks like the person updating SourveForge is also in charge of the site I pointed you to above. However, the latest version I saw on their site was 1.9 while SourceForge has a 1.12 version.

I will be trying to install this new version this afternoon but, being new to this, I'm always eager to hear recommendations.

Thanks




]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123673&page=0&view=collapsed&sb=5&o=14&vc=1#Post123673 Wed, 04 Nov 2009 04:30:58 -0800 sXi 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123673&page=0&view=collapsed&sb=5&o=14&vc=1#Post123673 Post Reply?

You using the Sourceforge version of dvipng or a customised jobbie?



Maximum Cash Discount on any plan with MAXCASH

How To Install PHP.INI / ionCube on DreamHost ]]> Post Reply?

You using the Sourceforge version of dvipng or a customised jobbie?



Maximum Cash Discount on any plan with MAXCASH

How To Install PHP.INI / ionCube on DreamHost ]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123670&page=0&view=collapsed&sb=5&o=14&vc=1#Post123670 Tue, 03 Nov 2009 20:12:41 -0800 spradlig 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123670&page=0&view=collapsed&sb=5&o=14&vc=1#Post123670 Post Reply?

I am new to DreamHost and I switched because I need to install MathTex. The creator of MathTex is on DreamHost and the package appeared better than my previous shared hosting package. I'm still deciding if I'll stay with DreamHost and this would go a long way.

MathTex (http://www.forkosh.com/mathtex.html) requires a latex package and dvipng. DreamHost already has latex but not dvipng. In order to compile dvipng you need libgd and libkpathsea. Both of which are available at /usr/lib and /usr/include. However, the configure command for dvipng consistently returns the error can't find/use libkpathsea.

I have not put dvipng under the texmf tree (not sure where this would go but I assume top level). I have simply tried to compile under one of my domain folders.

Thank you, in advance, for your help

Anyone know of a solution?

]]> Post Reply?

I am new to DreamHost and I switched because I need to install MathTex. The creator of MathTex is on DreamHost and the package appeared better than my previous shared hosting package. I'm still deciding if I'll stay with DreamHost and this would go a long way.

MathTex (http://www.forkosh.com/mathtex.html) requires a latex package and dvipng. DreamHost already has latex but not dvipng. In order to compile dvipng you need libgd and libkpathsea. Both of which are available at /usr/lib and /usr/include. However, the configure command for dvipng consistently returns the error can't find/use libkpathsea.

I have not put dvipng under the texmf tree (not sure where this would go but I assume top level). I have simply tried to compile under one of my domain folders.

Thank you, in advance, for your help

Anyone know of a solution?

]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123627&page=0&view=collapsed&sb=5&o=14&vc=1#Post123627 Mon, 02 Nov 2009 14:34:09 -0800 jkofoed 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123627&page=0&view=collapsed&sb=5&o=14&vc=1#Post123627 Post Reply?

I'm trying to use phpThumb to resize some gallery images. It just doesn't do the resize.

http://www.jasonkofoed.com/wedding/index.php?album=test

Does anyone know if this works or not?

]]> Post Reply?

I'm trying to use phpThumb to resize some gallery images. It just doesn't do the resize.

http://www.jasonkofoed.com/wedding/index.php?album=test

Does anyone know if this works or not?

]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123609&page=0&view=collapsed&sb=5&o=14&vc=1#Post123609 Sun, 01 Nov 2009 12:37:30 -0800 djsue 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123609&page=0&view=collapsed&sb=5&o=14&vc=1#Post123609 Post Reply?

Thanks again for your help.

Do both of the examples you site above have to be included when you run the package installer?

I created a bin directory and an include directory in my home directory, and again attempted to install the deblibstdc++6_4.3.2-1.1_i386.deb

I tried these commands:
[argonauts]$ export PATH=$loc/bin:$PATH
[argonauts]$ export CPATH=$loc/include:/usr/local/include:$CPATH
[argonauts]$ dpkg -i deblibstdc++6_4.3.2-1.1_i386.deb

And I got this response:
dpkg: requested operation requires superuser privilege

...then I tried prefixing the command with "sudo" and got the "not a super user, this incident will be reported" message again.

Can you give me any other tips? As a reminder, I'm a Linux newbie, so I don't always know which text in your examples is a placeholder which I should replace with my own directory or file names, and which text can be typed literally.


]]> Post Reply?

Thanks again for your help.

Do both of the examples you site above have to be included when you run the package installer?

I created a bin directory and an include directory in my home directory, and again attempted to install the deblibstdc++6_4.3.2-1.1_i386.deb

I tried these commands:
[argonauts]$ export PATH=$loc/bin:$PATH
[argonauts]$ export CPATH=$loc/include:/usr/local/include:$CPATH
[argonauts]$ dpkg -i deblibstdc++6_4.3.2-1.1_i386.deb

And I got this response:
dpkg: requested operation requires superuser privilege

...then I tried prefixing the command with "sudo" and got the "not a super user, this incident will be reported" message again.

Can you give me any other tips? As a reminder, I'm a Linux newbie, so I don't always know which text in your examples is a placeholder which I should replace with my own directory or file names, and which text can be typed literally.


]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123604&page=0&view=collapsed&sb=5&o=14&vc=1#Post123604 Sun, 01 Nov 2009 08:42:51 -0800 iacchi 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123604&page=0&view=collapsed&sb=5&o=14&vc=1#Post123604 Post Reply?

Hi,
I've set up two repositories on a domain and I want to use a WebSVN installation to view them. The users are different for the two repos, so I'd like to setup a per repository authentication in WebSVN. I've tried to follow the instructions in the installa file (modify .htaccess and adding the two repos in config.php) but I get an Error 500 on the server if I try to open a page.

Did anyone reach to use this authentication method with WebSVN here on DreamHost?

]]> Post Reply?

Hi,
I've set up two repositories on a domain and I want to use a WebSVN installation to view them. The users are different for the two repos, so I'd like to setup a per repository authentication in WebSVN. I've tried to follow the instructions in the installa file (modify .htaccess and adding the two repos in config.php) but I get an Error 500 on the server if I try to open a page.

Did anyone reach to use this authentication method with WebSVN here on DreamHost?

]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123601&page=0&view=collapsed&sb=5&o=14&vc=1#Post123601 Sun, 01 Nov 2009 05:21:14 -0800 sdayman 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123601&page=0&view=collapsed&sb=5&o=14&vc=1#Post123601 Post Reply?

It sure is installed. Did you use the Easy or Advanced One-Click installation?

In the Admin Control Panel, does the CAPTCHA show up in the Visual Confirmation Settings preview?

The following should show up in your Admin Control Panel under PHP Information:

gd

GD Support	enabled
GD Version	bundled (2.0.34 compatible)
FreeType Support	enabled
FreeType Linkage	with freetype
FreeType Version	2.2.1
GIF Read Support	enabled
GIF Create Support	enabled
JPG Support	enabled
PNG Support	enabled
WBMP Support	enabled
XBM Support	enabled

-Scott ]]> Post Reply?

It sure is installed. Did you use the Easy or Advanced One-Click installation?

In the Admin Control Panel, does the CAPTCHA show up in the Visual Confirmation Settings preview?

The following should show up in your Admin Control Panel under PHP Information:

gd

GD Support	enabled
GD Version	bundled (2.0.34 compatible)
FreeType Support	enabled
FreeType Linkage	with freetype
FreeType Version	2.2.1
GIF Read Support	enabled
GIF Create Support	enabled
JPG Support	enabled
PNG Support	enabled
WBMP Support	enabled
XBM Support	enabled

-Scott ]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123600&page=0&view=collapsed&sb=5&o=14&vc=1#Post123600 Sat, 31 Oct 2009 22:22:33 -0800 kelly7552 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123600&page=0&view=collapsed&sb=5&o=14&vc=1#Post123600 Post Reply?

When I use the 1 click install, the confirmation code doesn't show up on the registration page, meaning no new people can register. Other fourms suggest that it might be a php GD Library isn't installed. Does dramhost install the GD library?

]]> Post Reply?

When I use the 1 click install, the confirmation code doesn't show up on the registration page, meaning no new people can register. Other fourms suggest that it might be a php GD Library isn't installed. Does dramhost install the GD library?

]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123583&page=0&view=collapsed&sb=5&o=14&vc=1#Post123583 Sat, 31 Oct 2009 13:25:13 -0800 sXi 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123583&page=0&view=collapsed&sb=5&o=14&vc=1#Post123583 Post Reply?

A "nastygram" haha

Set up your env PATHs to point at local directories when installing serious software.

E.g.

export PATH=$loc/bin:$PATH
export CPATH=$loc/include:/usr/local/include:$CPATH

Maximum Cash Discount on any plan with MAXCASH

How To Install PHP.INI / ionCube on DreamHost ]]> Post Reply?

A "nastygram" haha

Set up your env PATHs to point at local directories when installing serious software.

E.g.

export PATH=$loc/bin:$PATH
export CPATH=$loc/include:/usr/local/include:$CPATH

Maximum Cash Discount on any plan with MAXCASH

How To Install PHP.INI / ionCube on DreamHost ]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123580&page=0&view=collapsed&sb=5&o=14&vc=1#Post123580 Sat, 31 Oct 2009 09:39:10 -0800 djsue 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123580&page=0&view=collapsed&sb=5&o=14&vc=1#Post123580 Post Reply?

OK, I'm back and I finally had time to try installing the libstdc++ package. I found instructions for installing a Debian package on Linux, but when I tried, the system said I didn't have super user privileges. Does that mean I'm totally out of luck here?

I logged into shell and tried this command:
sudo dpkg -i deblibstdc++6_4.3.2-1.1_i386.deb

I tried twice, and both times it said "djsue is not in the sudoers file. This incident will be reported."

Am I going to get a nastygram from Dreamhost security?

I also tried to install not as sudo and system returned "dpkg: requested operation requires superuser privilege"


]]> Post Reply?

OK, I'm back and I finally had time to try installing the libstdc++ package. I found instructions for installing a Debian package on Linux, but when I tried, the system said I didn't have super user privileges. Does that mean I'm totally out of luck here?

I logged into shell and tried this command:
sudo dpkg -i deblibstdc++6_4.3.2-1.1_i386.deb

I tried twice, and both times it said "djsue is not in the sudoers file. This incident will be reported."

Am I going to get a nastygram from Dreamhost security?

I also tried to install not as sudo and system returned "dpkg: requested operation requires superuser privilege"


]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123539&page=0&view=collapsed&sb=5&o=14&vc=1#Post123539 Thu, 29 Oct 2009 03:21:16 -0800 Griffo 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123539&page=0&view=collapsed&sb=5&o=14&vc=1#Post123539 Post Reply?

yes i have checked those values,

and i did change them initially.

I even restarted phpcgi

and recached php-wrapper.fcgi.

But when i attempt to run my upload script it returns an error of 1 for the php FILES array, which means the php file limit is set lower than file.

im using a mp3 file.

At this stage things are pointing to my php script so ill add it in here.
<?php

include "dbconn.php";
//include "php.ini";

$title = $_POST['title'];
$url = $_POST['url'];
$file = $_POST['file'];

//insert print data into db

$connection = connectDB();
$insert = " INSERT INTO audio ".
" VALUES (null, \"$title\", \"$url\", null)";
$result2 = mysql_query($insert,$connection);
disconnectDB($connection);

if (move_uploaded_file ($_FILES['file'] ['tmp_name'],
"audio/{$_FILES['file'] ['name']}") ) {
echo 'all good!';
}
else
{


switch ($_FILES['file'] ['error'])
{ case 1:
print '<p> The file is bigger than this PHP installation allows</p>';
break;
case 2:
print '<p> The file is bigger than this form allows</p>';
break;
case 3:
print '<p> Only part of the file was uploaded</p>';
break;
case 4:
print '<p> No file was uploaded</p>';
break;
}
}
?>

]]> Post Reply?

yes i have checked those values,

and i did change them initially.

I even restarted phpcgi

and recached php-wrapper.fcgi.

But when i attempt to run my upload script it returns an error of 1 for the php FILES array, which means the php file limit is set lower than file.

im using a mp3 file.

At this stage things are pointing to my php script so ill add it in here.
<?php

include "dbconn.php";
//include "php.ini";

$title = $_POST['title'];
$url = $_POST['url'];
$file = $_POST['file'];

//insert print data into db

$connection = connectDB();
$insert = " INSERT INTO audio ".
" VALUES (null, \"$title\", \"$url\", null)";
$result2 = mysql_query($insert,$connection);
disconnectDB($connection);

if (move_uploaded_file ($_FILES['file'] ['tmp_name'],
"audio/{$_FILES['file'] ['name']}") ) {
echo 'all good!';
}
else
{


switch ($_FILES['file'] ['error'])
{ case 1:
print '<p> The file is bigger than this PHP installation allows</p>';
break;
case 2:
print '<p> The file is bigger than this form allows</p>';
break;
case 3:
print '<p> Only part of the file was uploaded</p>';
break;
case 4:
print '<p> No file was uploaded</p>';
break;
}
}
?>

]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123538&page=0&view=collapsed&sb=5&o=14&vc=1#Post123538 Thu, 29 Oct 2009 02:56:17 -0800 sXi 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123538&page=0&view=collapsed&sb=5&o=14&vc=1#Post123538 Post Reply?

You'll need to check 2 settings in your php.ini:

  post_max_size = 11M
  upload_max_filesize = 10M

Maximum Cash Discount on any plan with MAXCASH

How To Install PHP.INI / ionCube on DreamHost ]]> Post Reply?

You'll need to check 2 settings in your php.ini:

  post_max_size = 11M
  upload_max_filesize = 10M

Maximum Cash Discount on any plan with MAXCASH

How To Install PHP.INI / ionCube on DreamHost ]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123537&page=0&view=collapsed&sb=5&o=14&vc=1#Post123537 Thu, 29 Oct 2009 01:32:29 -0800 Griffo 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123537&page=0&view=collapsed&sb=5&o=14&vc=1#Post123537 Post Reply?

Hi, i have added a file upload section to a admin only part of a website.

I have also updated the php.ini file for multiple domains(http://wiki.dreamhost.com/PHP.ini), yet i still have problems.

I am trying to upload audio(mp3) no larger than 10M.

Has any one had similar trouble.

Thanks

Griffo



]]> Post Reply?

Hi, i have added a file upload section to a admin only part of a website.

I have also updated the php.ini file for multiple domains(http://wiki.dreamhost.com/PHP.ini), yet i still have problems.

I am trying to upload audio(mp3) no larger than 10M.

Has any one had similar trouble.

Thanks

Griffo



]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123481&page=0&view=collapsed&sb=5&o=14&vc=1#Post123481 Tue, 27 Oct 2009 02:18:52 -0800 planetphillip 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123481&page=0&view=collapsed&sb=5&o=14&vc=1#Post123481 Post Reply?

Hi,

I am looking for a script that will allow visitors to a website the ability to "post" jokes and tag them with themes etc. Each joke would be rated by other visitors.

The site would allow visitors to see the latest jokes, hightest/lowest rated jokes, jokes by tags and a search facility.

Ideally, I wouldn't want users to have to register and login to post jokes.

Does anybody know of such a script or place where I might find one?

TIA
Phillip

Phillip
http://www.planetphillip.com/
Commentary and Analysis of Sci-Fi Single Player First Person Shooters ]]> Post Reply?

Hi,

I am looking for a script that will allow visitors to a website the ability to "post" jokes and tag them with themes etc. Each joke would be rated by other visitors.

The site would allow visitors to see the latest jokes, hightest/lowest rated jokes, jokes by tags and a search facility.

Ideally, I wouldn't want users to have to register and login to post jokes.

Does anybody know of such a script or place where I might find one?

TIA
Phillip

Phillip
http://www.planetphillip.com/
Commentary and Analysis of Sci-Fi Single Player First Person Shooters ]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123475&page=0&view=collapsed&sb=5&o=14&vc=1#Post123475 Mon, 26 Oct 2009 12:46:49 -0800 sdayman 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123475&page=0&view=collapsed&sb=5&o=14&vc=1#Post123475 Post Reply?

Look for a config.php file in your FTP directory, or if you can get to the Admin interface for MT, see if there are some Path options.

-Scott ]]> Post Reply?

Look for a config.php file in your FTP directory, or if you can get to the Admin interface for MT, see if there are some Path options.

-Scott ]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123474&page=0&view=collapsed&sb=5&o=14&vc=1#Post123474 Mon, 26 Oct 2009 11:45:21 -0800 dennisstevens 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123474&page=0&view=collapsed&sb=5&o=14&vc=1#Post123474 Post Reply?

I am trying to get Rails up and running in my domain.

I followed the instructions at http://wiki.dreamhost.com/Rails

I am able to get the default index.html to come up.

I am able to run db:migrate and run and work.

Check out http://www.dennissstevens.com/personalkanban

When I click on About your application’s environment I get a 404 error.

When I create a basic page I get a 404 error.

Any thoughts on how to actually get a rails app running in a subdirectory of my domain.

Help please. Dreamhost support considers this debugging my application. Getting the default smoke test running isn't debugging my application.

]]> Post Reply?

I am trying to get Rails up and running in my domain.

I followed the instructions at http://wiki.dreamhost.com/Rails

I am able to get the default index.html to come up.

I am able to run db:migrate and run and work.

Check out http://www.dennissstevens.com/personalkanban

When I click on About your application’s environment I get a 404 error.

When I create a basic page I get a 404 error.

Any thoughts on how to actually get a rails app running in a subdirectory of my domain.

Help please. Dreamhost support considers this debugging my application. Getting the default smoke test running isn't debugging my application.

]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123473&page=0&view=collapsed&sb=5&o=14&vc=1#Post123473 Mon, 26 Oct 2009 11:40:25 -0800 derfner 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123473&page=0&view=collapsed&sb=5&o=14&vc=1#Post123473 Post Reply?

My blog (for which I use Movable Type) has been moved to a new server, and now when I try to make posts, I get the following error message:

>"Error making path
>'/home/.festus/derfner/joelderfner.com/blog/2009/10': mkdir
>/home/.festus: Permission denied at lib/MT/FileMgr/ Local.pm line >105"

I wrote DreamHost about this and they said:

>The path there, is no longer valid. You'll need to update the path
>there, so that instead of:
>
>/home/.festus/derfner/joelderfner.com/blog/2009/10
>
>you have:
>
>/home/derfner/joelderfner.com/blog/2009/10
>
>The .festus directory is left over from the old server, and should
>never be used.

But the thing is, I have no idea how to do this, and DreamHost doesn't support third-party applications.

Can anybody help me fix this? I'm going crazy not being able to share my every thought with the entire world.

]]> Post Reply?

My blog (for which I use Movable Type) has been moved to a new server, and now when I try to make posts, I get the following error message:

>"Error making path
>'/home/.festus/derfner/joelderfner.com/blog/2009/10': mkdir
>/home/.festus: Permission denied at lib/MT/FileMgr/ Local.pm line >105"

I wrote DreamHost about this and they said:

>The path there, is no longer valid. You'll need to update the path
>there, so that instead of:
>
>/home/.festus/derfner/joelderfner.com/blog/2009/10
>
>you have:
>
>/home/derfner/joelderfner.com/blog/2009/10
>
>The .festus directory is left over from the old server, and should
>never be used.

But the thing is, I have no idea how to do this, and DreamHost doesn't support third-party applications.

Can anybody help me fix this? I'm going crazy not being able to share my every thought with the entire world.

]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123455&page=0&view=collapsed&sb=5&o=14&vc=1#Post123455 Sat, 24 Oct 2009 13:32:06 -0800 mattforni 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123455&page=0&view=collapsed&sb=5&o=14&vc=1#Post123455 Post Reply?

I've been working with RoR for about two years now, but have never really deployed an app to a server, since I merely coded and my boss handled that part. I managed to deploy my app, but as part of it I want to run demo versions of other apps I've written for work. Is there a way (with dreamhost) to deploy multiple RoR apps? I tried passenger but obviously on a shared host there's no way I can access the proper config files to get it running. Any help would be greatly appreciated.

- matt

]]> Post Reply?

I've been working with RoR for about two years now, but have never really deployed an app to a server, since I merely coded and my boss handled that part. I managed to deploy my app, but as part of it I want to run demo versions of other apps I've written for work. Is there a way (with dreamhost) to deploy multiple RoR apps? I tried passenger but obviously on a shared host there's no way I can access the proper config files to get it running. Any help would be greatly appreciated.

- matt

]]> http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123454&page=0&view=collapsed&sb=5&o=14&vc=1#Post123454 Sat, 24 Oct 2009 11:50:59 -0800 Persistent 3rdparty http://discussion.dreamhost.com/showflat.pl?Board=3rdparty&Number=123454&page=0&view=collapsed&sb=5&o=14&vc=1#Post123454 Post Reply?

I know it's been weeks, but I finally got into the logs...

I get:

[client] Premature end of script headers: dispatch.cgi, referer: http://www.persistenceunlimited.com/wp-admin/comment.php?action=mac&c=53155

I will also try disabling the aski plugin.

]]> Post Reply?

I know it's been weeks, but I finally got into the logs...

I get:

[client] Premature end of script headers: dispatch.cgi, referer: http://www.persistenceunlimited.com/wp-admin/comment.php?action=mac&c=53155

I will also try disabling the aski plugin.

]]>